DPM72 CO2 : Carbon Dioxide Analyzer
The DPM72 CO2 Carbon Dioxide analyzer in in a self-contained unit housed in a custom 3U x 1/2 rack width case, that can also be panel mounted.
This unit uses a high-stability dual wavelength infra-red sensor, it has a built in sample gas drier and flow meter with regulating valve. The display has a high and low set points with audio visual alarm and mute circuit.
Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained in a non-volatile memory.
| Specifications | |
| OPERATING PRINCIPLE | Infra-red Absorption (Dual Wavelength) |
| RANGE | 0 to 0.5% CO2 0-5000ppm Other ranges on request |
| ACCURACY | +/-1% of Full Scale |
| ZERO DRIFT | <+/-2% FSD over 12 months |
| TEMPERATURE EFFECT | <0.4% of F.S.D. per Deg. C |
| RESPONSE TIME | 90% in 10 sec (sample application) |
| WARM UP TIME | <3 minutes |
| SAMPLE FLOW | 10 to 300 ml/min |
| HOUSING | 3U X 42HP (1/2 rack) |
| RELAY OUTPUT | 8 Amp change-over relay |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |