DPM72 O2 /P: Paramagnetic Oxygen Analyzer
The DPM72 O2/P Paramagnetic Oxygen analyzer in in a self-contained unit housed in a custom 3U x 1/2 rack width case, that can also be panel mounted.
This unit uses a high-stability sensor based on the Faraday principle of paramagnetism. This form of sensing provides advantages over conventional "Fuel Cell" sensing as it does not deteriorate over time, and therefore periodic sensor replacement is not required.
The display has a high and low set points with audio visual alarm and mute circuit.
Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained in a non-volatile memory.
| Specifications | |
| OPERATING PRINCIPLE | Paramagnetic principle |
| RANGE | 0 to 100% Oxygen |
| ACCURACY | 0.2% of Full Scale |
| RESPONSE TIME | 0.5 sec at 90ml/min flow |
| SAMPLE FLOW | 50 to 100 ml/min |
| HOUSING | 3U X 42HP (1/2 rack) |
| RELAY OUTPUT | 8 Amp change-over relay |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |