DPM72 T&H: Temperature & Humidity Monitor
The DPM72 T&H , Temperature & Humidity monitor is a modular unit with a seperate sensor and dual displays housed in a custom 3U x 1/2 rack width case, that can also be panel mounted.
The unit uses a combined temperature and humidity sensor. Humidity is measured using a capacitive Polymer sensor. Temperature is measured using a high stability Molybdenum sensing element.
The display modules both have a high and low set points with audio visual alarm and mute circuit.
Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained in a non-volatile memory.
| Humidity Specifications | |
| OPERATING PRINCIPLE | capacitive Polymer |
| RANGE | 0 to 100% RH |
| ACCURACY | 2% RH |
| Temperature Specifications | |
| OPERATING PRINCIPLE | Molybdenum ressistance element |
| RANGE | 0 to 50 ° C |
| ACCURACY | 0.1 ° C |
| Display Unit Specifications | |
| HOUSING | 3U X 42HP (1/2 rack) |
| RELAY OUTPUT | 8 Amp change-over relay |
| OPERATING TEMP. RANGE | 0 to 45 ° C |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |