OEM72 CO: Carbon Monoxide Monitor
The OEM72 CO Carbon Monoxide monitor is a cost effective unit in modular form that consists of a panel mounted display unit and a seperate sensor that can be installed remotely.
This unit uses a high-stability electro-chemical sensor with built in temperature compensation.
The display has a high and low set points with audio visual alarm and mute circuit.
Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained in a non-volatile memory.
| Specifications | |
| OPERATING PRINCIPLE | Electro-chemical |
| RANGE | 0 to 100ppm CO |
| DISPLAY RESOLUTION | 0.1 ppm |
| OVERALL RESOLUTION | 0.5 ppm CO |
| TEMPERATURE EFFECT | 0.5 ppm per Deg. C |
| RESPONSE TIME | 90% in 35 sec |
| SENSOR LIFE | 2 years |
| SAMPLE FLOW | 10 to 300 ml/min |
| HOUSING | Seperate display and sensor |
| RELAY OUTPUT | 8 Amp change-over relay |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |