OEM72 CO2A: Carbon Dioxide Monitor
The cost effective OEM72 CO2A Carbon Dioxide analyzer in modular form that consists of a panel mounted display unit and a seperate sensor that can be installed remotely.
This unit is used ambient Carbon Dioxide levels. When monitoring ambient CO2, the sensor is wall mounted vertically and draws in its sample by convection.
The display has a high and low set points with audio visual alarm and mute circuit.
Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained in a non-volatile memory.
The CO2 sensor housing can also accomodate an O2 sensor, connected to a seperate display unit, for limited space applications.
| Specifications | |
| OPERATING PRINCIPLE | Infra-red Absorption (Dual Wavelength) |
| RANGE | 0 to 0.5% CO2 0-5000ppm |
| ACCURACY | +/-2% of Full Scale |
| ZERO DRIFT | <+/-2% FSD over 12 months |
| TEMPERATURE EFFECT | <0.4% of F.S.D. per Deg. C |
| RESPONSE TIME | 90% in 10 sec (sample application) |
| WARM UP TIME | <3 minutes |
| HOUSING | Seperate display and sensor |
| RELAY OUTPUT | 8 Amp change-over relay |
| SAMPLE FLOW | Convection |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |