OEM72 O2/P: Paramagnetic Oxygen Monitor
The OEM72 O2 /P Paramagnetic Oxygen monitor is a cost effective unit in modular form that consists of a panel mounted display unit and a seperate sensor that can be installed remotely.
This unit uses a high-stability sensor based on the Faraday principle of paramagnetism. This form of sensing provides advantages over conventional "Fuel Cell" sensing as it does not deteriorate over time, and therefore periodic sensor replacement is not required.
The display has a high and low set points with audio visual alarm and mute circuit.
Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained in a non-volatile memory.
| Specifications | |
| OPERATING PRINCIPLE | Paramagnetic principle |
| RANGE | 0 to 100% Oxygen |
| ACCURACY | 0.2% of Full Scale |
| RESPONSE TIME | 0.5 sec at 90ml/min flow |
| SAMPLE FLOW | 50 to 100 ml/min |
| HOUSING | Seperate display and sensor |
| RELAY OUTPUT | 8 Amp change-over relay |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |