OEM72 P: Pressure Monitor
The OEM72 P pressure monitor consists of a display unit and a seperate pressure transmitter that is fitted into the pressure circuit to be measured. The display is panel mounted through a 66 mm square cut-out.
Various types of pressure sensors can be supplied, to suit diverse applications. .
The display has a high and low set points with audio visual alarm and mute circuit. The high set point is ideal for use as an over-pressure alarm, while the low alarm functions as a sensor fault indicator.
Calibration is entered from the front panel, can be hardware locked to prevent accidental changes. All the calibration and alarm parameters are retained in a non-volatile memory.
| Sensor Specifications | |
| OPERATING PRINCIPLE | Isolated Silicon Diaphragm pressure transmitter (example) |
| RANGE | To suit application |
| ACCURACY | Depends on the tranducer used Typically 0.3% of FS or 0.1% of FS |
| OPTIONS | Submersible : Differential; Ex |
| POWER REQUIREMENTS | Powered from display |
| Display Specifications | |
| HOUSING | 72 mm DIN case |
| RELAY OUTPUT | 8 Amp change-over relay |
| OPERATING TEMP. RANGE | 0 to 45 ° C |
| OPTIONS | Analog/Serial output |
| WARRANTY | 12 months |
| POWER REQUIREMENTS | 110, 220 VAC or 24 VDC 6 W |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |