Sea-Jet® Cutting Electrodes

Patented underwater exothermic Sea Jet cutting electrodes will burn ferrous and melt non-ferrous materials such as concrete, rock, barnacles and other sea growth. The Sea-Jet electrode can be used like other oxygen-arc cutting electrodes. A DC constant current welding power supply on straight polarity (electrod negative), ground the workpiece and by touching the owrkpiece and electric arc ignites the electrode. Once ignited the electrode will continue to burn by the means of an exothermic reaction between the steel components of the electrode and the oxygen flowing through the electrode. Remember, Sea-Jet Electrodes will burn as long as the oxygen is flowing through the electrode. For igniting the electrode only, a 12 VDC battery may be used. This presents an added safety margin against the possibility of electrical shock.

• Diameter : 3/8" (9.5 mm)
• Length : 18" (458 mm)

Back to Top

Sea-Cut® I Cutting Electrodes

Sea Cut I Electrodes are a tubular steel design used for oxygen-arc cutting. These electrodes are coated w/ a waterprood insulating material. They are not flux coated.

• Diameter
  • Outside 5/16" (8mm)
  • Bore Hole . 113" (3 mm)
• Length : 14" (355.6mm)

Back to Top

Tuff-Cote® Cutting Electrodes

Tuff-Cote tubular steel oxygen-arc cutting electrodes are first coated w/ an arc stabilizing flux coating, then waterproofed, protecting the flux from moisture absorption and providing electrical insulation.

• Diameter
  • Outside 5/16" (8 mm)
  • Bore Hole .113" (3 mm)
• Length : 14" (355.6 mm)

Back to Top

SeaDragon™ Cutting Electrodes

Patented underwater exothermic Sea Dragon cutting rods will burn most materials encountered in underwater cutting jobs. The Sea Dragon rod can be used like other oxygen-arc cutting electrodes. A DC constant current welding power supply set on straight polarity electrode touches the work, an electric arc ignites the electrode. The workpiece is grounded. Once ignited, the electrode will burn by the means of an exothermic reaction between the steel components fo the electrode and the oxygen flowing through the electrode, thus enabling the cutting to be done w/ or without electrical power. The Sea Dragon Rod will burn as long as the oxygen is flowing through the rod. For ignition only, when cutting without power, a 12 VDC battery may be used. This presents an added safety margin against the possibility of electrical shock.

• Diameter : 3/8" (9.5 mm)
• Length : 18" (458 mm)

Back to Top

Sea-Weld® Welding Electrodes

Arcair's improved Sea-Weld electrode is the answer to the need for structural fabrication and repairs requiring underwater wet welding. This all position, flux coated SMAW electrode has been developed to provide the following features:

• Welds w/ excellent bead contour.
• Fillet welds are flat w/ good base metal wetting, which helps keep undercut to a minimum
• Easy slag removal which keeps chipping and grinding to a minimum, allowing faster welding time
• The Sea-Weld electrode has produced welds which pass bend and X-ray requirements as deifined by the
• AWS D3.6 specification for underwater welding
• Length : 14" (355.6 mm)
• Diameter
  • 1/8" (3.2 mm)
  • 5/32" (4.0 mm)
  • 3/16" (4.8 mm)

Back to Top

Arcwater® Gouging Electrodes

These copper coated carbon / graphite electrodes are expecially made for the Arcwater process. Waterproofed w/ a white coating, Arcwater electrodes require 350 to 450 amperes for proper operation.

• Diameter : 5/16" (7.9 mm)
• Length : 9" (228.6 mm)

Back to Top

: Email Address