Oxylance Underwater Cutting and Welding Rods
AQUA EXO Underwater Cutting Rods
3/8 " Exothermic Underwater Cutting Rods
*Easy to Use - Improves diver's skill with minimum training. Reduce training cost by practicing above water
*Standard Size - 3/8" x 18"
*Corrosion Resistant - Proprietary Plating Process reduces the number of rusty corroded rods you throw away resulting in less waste, reducing job cost.
*Packaging - Each plastic box contains 45 rods.
*Versatile - One consumable can be used both above and below water. Reduces having multiple cutting systems on the job.
A q u a l a n c e™ Underwater Cutting Rods
*Easy to Use - Improves diver's skill with minimum training. Reduce training cost by practicing above water
*Standard Size - 5/16" x 16" (8mm x 406mm)
*Corrosion Resistant - Proprietary Plating Process reduces the number of rusty corroded rods you throw away resulting in less waste, reducing job cost.
*Packaging - Each plastic box contains 50 rods (5 heat sealed poly packs with 10 rods per pack).
*Versatile - One consumable can be used both above and below water. Reduces having multiple cutting systems on the job.
Typical Performance Data for 5/16" Tubular Steel Electrode
| Steel Thickness | Travel Distance | Amperage | O2 Pressure |
| 1/2" (12mm) | 26" (650mm) | 300 | 40 to 60 PSI |
| 5/8" (16mm) | 24.25" (620mm) | 300 | 40 to 60 PSI |
| 3/4" (20mm) | 23.24" (590mm) | 300 | 60 to 70 PSI |
| 1½" (37mm) | 14.5" (375mm) | 300 | 70 to 80 PSI |
| 2" (50mm) | 11.25" (288mm) | 300 to 400 | 80 to 90 PSI |
These results were accomplished by first properly cleaning the steel. Just as above water, heavily corroded or barnacle encrusted steel does not burn as readily as clean steel. Burning was performed using the drag method. The travel distance was with one electrode. (O2 pressure is the pressure over bottom pressure.)
Surweld™ Underwater Welding Rods
*Easy to Use - Welds similar to topside rods. Divers can learn to weld above water and transition to wet welding with minimal training.
*Qualification - Meets or exceeds the requirements for ANSI/AWS D3.6 all positions Fillet and Groove welds. Surweld electrodes have qualified welds to both ANSI/AWS D3.6 and Class O welds. Our stainless steel electrodes have been tested for Nuclear repairs and passed 2t bends and radiographs for ASME.
*Depth - Fillet weld qualifications all positions to .360' (110 meters) ANSI/AWS D3.6 Class B weld. (The deepest wet weld repair ever qualified for and completed was performed with Surweld #1 mild steel electrode...360fsw, Offshore New Zealand.)
*Packaging Each -plastic box contains 120 electrodes (6 heat sealed poly packs containing 20 electrodes per pack).
* US Navy Approved - Wet welds produced with Surweld Ni are the only nickel electrode approved by the US Navy for higher carbon steel ship hull repairs. Repairs have been successfully completed on US Navy ships using the Surweld Ni.
Surweld Electrode Type and Size
| Oxylance Number | Type | Size |
| Surweld #1 | Mild Steel | 3/32", 1/8", and 5/32" |
| Surweld #33 | Stainless Steel | 3/32" and 1/8" |
| Surweld Ni | Nickel | 3/32" |
Ordering Information
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |