UA-10 Arc-Oxygen Cutting Torch
Arc-Oxygen Cutting Torch Color Parts Breakdown
AAI-Craftsweld Arc-Oxygen Cutting Torches are fully insulated, comfortably balanced tools specifically designed for their particular jobs. Every torch is manufactured to the high standards of quality for which Aqua-Air has long been recognized. Both models are very easy to use after only a few minutes practice and have proven completely dependable in world-wide use.
Every Torch is manufactured w/ a 5' length of oil-resistant, extra-flexible copper welding cable soldered directly into the Head for reliable and efficient electrical conductivity. The other end of the cable is terminated in a copper lug (also soldered). The bronze Collet, Locknut, and Head provide a secure grip for the electrode w/ full electrical contact. The Internal Washer in the Head gives a positive seal for the oxygen path through the core of the electrode. A mere quarter-turn of the Locknut secures or releases the electrode.
Upon release, the stub of the consumed electrode may be ejected w/ a short squeeze of oxygen from the Trigger Valve. When inserting a new electrode in the Torch, the mouth of the Locknut guides the electrode into place, without awkward fumbling (an important feature underwater, where visibility is poor).
All current-conducting parts of the torches are permanently insulated w/ laminated micarta, and the bronze Oxygen Trigger Valve Assembly is completely isolated from the electrical front section of the torch. The Oxygen Valve may be rotated a full 360° to permit the operator to position the Trigger for his convenience. The built-in Flash Arrester Cartridge and Screen provide utmost safety. The Cartridge may be removed for inspection or cleaning in just 30 seconds w/ a screwdriver. If the Screen has been burned out by severe flashback, it takes only a few seconds to replace it.
Ordering Information
| UA-SP-1 | Spare Parts Kit for UA-10 Underwater Torch 1 each of Parts #2a, #4, #7u, #9bc, #9g, #15, #16 and 3 each Part #4a and 6 each Part #14 |
| SC-SP-1 | Same as above, but for SC-10 Torch |
| Factory Assemblies | |
| The following Factory Assemblies may be ordered to make field repairs. They consist of the parts indicated and are assembled and soldered, as required. All other parts require only a screw driver or wrench | |
| A-17 | Parts #1 and #5 factory assembled |
| A-18c | Parts #1, #5, and #10c and #12 assembled |
| A-18n | Parts #1, #5, #10n, and # 12 assembled |
Specificy Part Number and Name when Ordering
"u" for Underwater
"s" for Surface Torch
when ording Parts #3_, #7_, and #13_
Ordering Information
AAI-Craftsweld Main Index | Cutting & Welding Main Index
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |