Western Brass Ferrules and Crimping Tools - Fittings and Valves

Brass Ferrules and Crimping Tools

Brass Hose Ferrules
Brass Ferrule / Brace Size-Selector Kit
Brass Splicer / Ferrule & Crimping Tool Kit
Brass Ferrule & Crimping Tool Kit
Bench Ferrule Crimping Tool
Hand-Held Ferrule Crimping Tools
Heavy-Duty Ferrule Crimping Machine

Brass Ferrule / Brace Size-Selector Kit

The Hose Industry uses a variety of OD hose measurements. As a result, the best way to size ferrules to hoses accurately is w/ this Western Size-Selector Kit. The kit contains one each of all Western ferrule sizes and oval brace sizes in a durable plastic case. Use samples to test various sizes to determine proper fit. Then order by number using complete Part Number index contained in the case cover. Use kit parts only to determine which sizes are to be ordered. Return parts to kit case.

FK-1

Size Selector Kit, 41 Ferrule / Brace Samples in Box

Brass Splicer / Ferrule & Crimping Tool Kit

Kit contains C-1 Crimping Tool, plus six 1/4" Splicers, two 3/16" Splicers, eighteen 7326 1" Ferrules, and eight 769 3/16" Ferrules. Convenient carrying case.

C-2

Crimping Tool Kit w/ Splicers and Ferrules

Brass Ferrule & Crimping Tool Kit

Contains extensive assortment of brass Ferrules for use on 3/16", 1/4", and 3/8" Hose. Wide range of sizes aids in quick, safe repairs in shop or on site. Wide range of sizes aids in quick, safe repairs in shop or on site. Included are 12 popluar sizes in a total of 134 Ferrules. Kit also includes two crimping tools, type C-3A and type C-3B for crimping all Ferrule sizes in kit.

	CK-10	Ferrule Kit, 134 Pieces, C-3A & C-3B Crimp Tools
	CK-0	Yellow Case Only, Adaptable to 18 Compartments

Bench Ferrule Crimping Tool

Ferrule Contracting Tool For All Ferrules Listed. Manually Operated. Ideally Suited For Production / Repair Facilities.
8" x 3" Base, 7-3/8" Body. 27" High. 29 lbs. Tool Does Not Include Dies. Dies Ordered Seperately.
Dies are available in standard sets for all ferrules included in Ferrule Table. Each set includes four segments. Dies are available w/ plain contracting surface (CD) or special three-ribbed type (CDR). Sets are ordered by using die numbers in Ferrule Table.
- Example : (Plain Die for Ferrule K-K : Order CD-38) - (Ribbed Die for Ferrule K-K : Order CDR-37)

5111A

Bench Model Hose Crimper (dies not included)

Hand-Held Ferrule Crimping Tools
For Crimping Ferrules On Twin Or Single Hose

Crimp w/ Hammer Strike or Vise Pressure	Crimp w/ Hand-Grip Pressure
2 Hole Jaw	2 Hole Jaw
3 Hole Jaw	3 Hole Jaw

	C-1	2 Hole Jaw 5/8" Wide, Use on 3/16", 1/4" Hose -
	C-3	3 Hole Jaw 1" Wide, Use on 3/16", 1/4", and 3/8" Hose -
	C-3A	3 Hole Jaw 5/8" Wide, Use on 1/8", 3/16" Hose -
	C-3B	3 Hole Jaw 1" Wide, Use on 1/4", 5/16", 3/8" Hose -
	C-5	2 Hole Jaw 1/2" Wide, Use on 3/16", 1/4" Hose -
	C-5A	3 Hole Jaw 1/2" Wide, Use on 5/16", 11/32", 27/64" Hose -

Heavy-Duty Ferule Crimping Machine

Low Cost, Portable and Self-Contained
Allows for Fitting / Repairing Mose Popular Hose Sizes without Changing Dies
One-Hand Operation, Rugged
Instant Die Selection
Crimps Ferrules On 3/16", 1/4", 5/16", 3/8" Hose
Die Width 1/2"

CR-100

Heavy-Duty Ferrule Machine

Ordering Information

: Email Address

HP Brass Main Index | Fittings & Valves Main Index

Home | Product Index | Email

AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA

Phone	(504) 362-8124
Fax	(504) 362-3600
E-Mail	sales@aquaairind.com