Cylinder Racks
With many thousands in use throughout the United States, cylinder cradle assemblies are a proven, field tested, task rated design for applications requiring high volume gas usage. These units provide the orderly grouping and manifold of single large cylinders. The cradling of cylinders makes a neat, compact, safe maneuverable gas supply that can be easily exchanged for re-charging. Designed to carry standard 244 - 330 cubic foot cylinders, these cradle assemblies are constructed of formed 7 gauge steel and are supplied with 3/4" diameter threaded tie down rods, heavy-duty hex nuts, drain out holes and have a 2000 lb maximum load capacity. Features a positive placement top that secures each cylinder at the collar, a double-welded 3/4" diameter bar formed lifting eye, heavy-duty casters and a knock down design that enables these units to be easily compacted for storage or for shipping and re-assembly. Finished with the new hard coat, gray enamel paint process. NOTE: When ordering any of the cylinder cradles below, the size and type of the cylinders to be mounted must be specified.
* click on picture for larger image *
 |
Height: 74" -- Depth: 28-3/4"
Width: 24" -- Weight: 136 lbs. The CB6-4 is the most versatile six cylinder cradle on the market today. No other equipment is needed to roll this unit on and off trucks, loading docks, etc. Designed to handle six 244 cubic foot cylinders or six 330 cubic foot cylinders and is equipped with two 6" x 2.00" double race, steel, swivel casters and two 6" x 2.00" steel, rigid casters with grease fittings. |
* click on picture for larger image *
 |
Height: 74" -- Depth: 28-3/4"
Width: 19-1/2" -- Weight: 129 lbs The CB6-2 carries six 244 cubic foot cylinders or six 330 cubic foot cylinders and is equipped with two 6" x 2.00" steel, rigid casters with grease fittings for use with a separate lever action third wheel assembly. The lift and pull pin dimension must be specified as 5th wheel assemblies vary in size. |
* click on picture for larger image *
 |
Height: 66" -- Depth: 28-3/4"
Width: 19-1/2" -- Weight: 121 lbs The CB-6 will handle six 244 cubic foot cylinders or six 330 cubic foot cylinders and is designed for shipping or stationary use. This unit has no casters; can be lifted with a forklift. |
* click on picture for larger image *
  |
Height: 74" -- Depth:
38-1/2 " Width: 28-3/4" -- Weight: 196 lbs The CB12-4 carries twelve 244 cubic foot cylinders and is equipped with two 6" x 2.00" double race, steel, swivel casters and two 6" x 2.00" steel, rigid casters with grease fittings. |
* click on picture for larger image *
 |
Length: 26" Weight: 10 lbs. The CM-6 is a six cylinder manifold for use with cylinder cradles CB6-4, CB6-2, and CB-6. |
* click on picture for larger image *
 |
Length: 38" Weight: 15 lbs. The CM-12 is a twelve cylinder manifold for use with cylinder cradles CB12-4. |
Ordering Information
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |