Standard Harness - SH-100-7

This harness has two front D-rings and one rear for air hook up. This provdies a means to secure the diving hose, without strain to the mask or helmet. Includes two extra D-rings mounted on chest straps. Heavy stainless belt adjusters are optional.

Back

Bell Harness - BH-200

This harness is set up for Bell diving, w/ rear upper D-rings for emergency lifting of divers. Two front D-rings provide hook ups for air, or gas hose. A heavy duty belt adjuster is provided for the optional jock strap

Back

Bell, Back Pack Harness - BHBP-700

This harness is set up to Bell or surface supply diving w/ 2 front D-rings for hook up, plus an upper D-ring to facilitate emergency lifting of divers. A heavy belt adjuster is provided for using a jock strap if desired. The 1/4" thick back pack is 2 ply nylon, reinforced rubber, punched to accept stainless bands or our 2" Tank cam locks.

Back

Back Pack - BP-400

Identical to the Bell Back Pack but without the vertical webbing on the back pack and without the upper read D-ring and the belt adjuster. The 1/4" thick back pack is 2 ply nylon, reinforced rubber, punched to accept a bail out bottle using stainless bands or 2" cam locks. All harnesses and weight belts come standard w/ our 2" by 1/8" thick Dura-soft nylon webbing, at no extra charge.

Professional Weight Belt - WB-500

The heavy 1/8" thick by 2 shoulder webbing, w/ heavy stainless adjusters are standard features at no additional cost. With all the shell type commercial dry suits, extra heavy Dura-soft webbing is essential for comfort and minimizing chafing. All metal components, w/ the exception of the weights and bronze buckle are non-magnetic 300 series stainless steel. The durable rubber belting is reinforced w/ 2 plys of nylon. Standard belt dimensions are, 48" long by 4-1/2" wide by 1/4" thick. The belt is adjustable for waist size ; weight requirements and shoulder strap length. Stainless rivets are used on all the shoulder straps instead of stitching, to meet OSHA requirements.

Quick Release Buckle

Professional Weight Belt Styles
The belt assembly without weights is approximately five pounds.
Additional weight assemblies are available in 3, 5, and 8 lb
blocks w/ backup plates, nuts and bolts

Back

Ordering Information

* You MUSTfill in ALL fields to recieve a response. Thank You*