The CH18 Chipping Hammer, with “D” handle, is a light but powerful alternative to the air powered tools. Both the handle and tool holder are shock and heat insulated for operator comfort. Designed to be small and Compact for confined working conditions, the CH18 accepts standard 0.580" round collar steels.
| Item | U.S. | Metric |
| Capacity | 2-1/2" Shank x 0.580" Hex 63mm Shank x 15 mm Hex | |
| Weight | 24 lb. | 11 kg |
| Length | 20" | 51 cm |
| Width | 3" | 8 cm |
| Pressure | 1500-2000 psi | 105-140 bar |
| Flow Range | 7-9 gpm | 26-34 lpm |
| Optimum Flow | 8 gpm | 30 lpm |
| Porting | -6 SAE O-Ring | |
| Hose Whips | Yes | |
| Connected Size & Type | 3/8" Male Pipe Hose End | |
The Hydraulic Tool’s HD45 Hammer Drill is a heavy duty model designed for use in medium to heavy applications. It’s the ideal tool for drilling holes and for setting anchor belts. Drills Holes from 3/4" (19mm) to 2" (50mm) in diameter and up to 29" (73.7cm) deep as well as core drilling up to 4" (102mm) in diameter. The HD45 uses standard Skill 736 type carbide tipped, fluted drill bits and requires no fluid to clear holes during operation. Feathering On/Off Valve/Adjustable Bit Rotation Speed (forward or reverse) make the HD45 easy to start and easy to control.
| Item | U.S. | Metric |
| Chuck Capacity | Up to 2" dia. or 4" core, 736 Skill hex | |
| Output | 0 - 300 rpm | |
| Input Flow Range | 7 - 9 gpm | 26 - 34 lpm |
| Input Pressure | 1500-2000 psi | 105 - 140 bar |
| Optimum Flow | 8 gpm | 30 lpm |
| Weight | 45 lb | 20.4 kg |
| Length | 22.5" | 57 cm |
| Width (at handles) | 14" | 35 cm |
| Motor | Internal | |
| Porting | 8 SAE O-Ring | |
| Connector | 3/8" Male Pipe Hose End | |
The Sinker Drills are designed for underwater construction, blast hole drilling and dowel drilling. The Sinker Drills also feature easy start feathering triggers and direct drive rotating motors for reliable service. Rotation is independent of impact rate and is adjustable between 0 and 300 rpm. The SK58 is intended for heavy-duty applications. It can drill up to a 3" (75mm) hole up to 20’ (6m) deep. In addition to adjustable rotation, the SK58 offers a feathering trigger for easy starting.
| Item | U.S. | Metric |
| Capacity | 4-1/4" Shank x 1" Hex | |
| Weight | 67 lb. | 30 kg |
| Length | 26" | 66 cm |
| Width | 18" | 46 cm |
| Pressure | 1500-2000 psi | 105 - 140 bar |
| Flow Range | 7 - 9 gpm | 26 - 34 lpm |
| Optimum Flow | 9 gpm | 34 lpm |
| Porting | 8 SAE O-Ring (Hydraulic) | |
| ½" NPT (Air) | ||
| Air Whips | Yes (Hydraulic) | |
| Yes (Air/Water) | ||
| Connect Size & Type | 3/8" Male Pipe Hose End (Hydraulic) | |
| 3/8" Male Pipe Hose End (Air/Water) | ||
| Motor | Integral | |
Features and Benefits:
The DL09 Drill is ideal for drilling holes in wood, metal and masonry. It features the HyRevz gear-type motor, ½” (12.7 mm) chuck and instant reverse for high reliability and efficiency in all types of drilling applications. Dual-Position Assist Handle model DL09 provides increased control and performance on tough drilling jobs. Oversized Feathering Trigger provides better control of drill speed and increased operator comfort and convenience. Shock Absorbing handle Coating provides heat and shock insulation for increased comfort, better grip and reduced operator fatigue.
| Item | U.S. | Metric |
| Chuck Capacity | 1/2” | 12.7 mm |
| Spindle Speed | (See Table Below) | |
| Input Flow Range | (See Table Below) | |
| Maximum Flow | 12 gpm | 45 lpm |
| Input Pressure | 2000 psi maximum | 140 bar maximum |
| Weight | 6 lbs | 2.7 kg |
| Length | 9” | 22.9 cm |
| Width | 3-1/2” | 89 mm |
| Motor | Hyrevz Gear | |
| Porting | 8 SAE O-Ring | |
| Connector | 3/8” Male Pipe Adapter | |
| DL09 Torque and Drill Speeds | |||
| Torque (proportional to Oil Pressure) | Drill Speed ( proportional to Oil Flow) | ||
| U.S. | Metric | Hydraulic Flow | Drill Speed |
| 4 ft / lb @ 500 psi | 0.5 Nm @ 35 bar | 3 gpm (11.3 lpm) | 350 rpm |
| 9 ft / lb @ 1000 psi | 1.2 Nm @ 70 bar | 4 gpm (15 lpm) | 475 rpm |
| 14 ft / lb @ 1500 psi | 1.9 Nm @ 105 bar | 6 gpm (23 lpm) | 750 rpm |
| 19 ft / lb @ 2000 psi | 2.6 Nm @ 140 bar | 8 gpm (30 lpm) | 1000 rpm |
| 10 gpm (38 lpm) | 1250 rpm | ||
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |