The Hydraulic Chain Saws offer the highest power-to-weight ratio of any chain saw on the market today. They’re ideal for underwater use because of their wide range in flow and pressure requirements. The CS06 is used around the world by diving contractors and construction crews. Safety has been designed in - all models feature interlocking triggers, hand guards, low kickback bars and chains. Hydraulic power doesn’t require a flywheel to smooth power pulses so there is no chain coasting when you release the trigger. Kickback is also reduced without the centrifugal force from the flywheel used on gas driven saws. The CS06 can be ordered in a wide variety of bar lengths.
| Item | U.S. | Metric |
| Capacity (cut length) | 15 & 20" | 38 & 51 cm |
| Weight (without bar) | 6.25 lb | 2.8 kg |
| Length (without bar) | 14" | 36 cm |
| Width | 9" | 23 cm |
| Pressure | 1000-2000 psi | 70 - 140 bar |
| Flow Range | 7 - 9 gpm | 26 - 34 lpm |
| Optimum Flow | 8 gpm | 30 lpm |
| Porting | -8 SAE O-Ring | |
| Hose Whips | No | |
| Connected Size & Type | 3/8" Male Adapter | |
| Motor | Integral | |
The Hydraulic Chain Saws offer the highest power-to-weight ratio of any chain saw on the market today. They’re ideal for underwater use because of their wide range in flow and pressure requirements. The CS11 is used around the world by diving contractors and construction crews. Safety has been designed in with interlocking triggers, bucking spurs and hand guards on all models. Hydraulic power doesn’t require a flywheel to smooth power pulses so there is no chain coasting when you release the trigger. Kick-back is also reduced without the centrifugal force from the flywheel used on gas driven saws. The CS11 can be ordered in a wide variety of bar lengths. The CS11 hydraulic chain saw is designed for extreme-duty applications. It offers more power per pound than any other chain saw you can buy. With many available bar lengths (up to a 43" / 109 cm cut), the CS11 can handle bridge pilings, railroad ties and utility poles.
| Item | U.S. | Metric |
| Capacity (cut length) | 24, 30, 36, & 43" | 61, 76, 91, & 109 cm |
| Weight (without bar) | 24 lb | 6 kg |
| Length (without bar) | 17" | 43 cm |
| Width | 9" | 23 cm |
| Pressure | 1500-2000 psi | 105 - 140 bar |
| Flow Range | 10 - 14 gpm | 38 - 53 lpm |
| Optimum Flow | 14 gpm | 53 lpm |
| Porting | 8 SAE O-Ring | |
| Hose Whips | Yes | |
| Connected Size & Type | ½" Male Pipe Hose End | |
| Motor | 07362 | |
The DS11 Diamond Chain Saw brings new technology to the concrete cutting industry. Using segments impregnated with diamond and laser-welded to the saw’s chain, you can cut concrete (including wire or rear reinforced), brick, concrete block, masonry or stone. Square Corner Cut Capability is inherent because the DS11 is a chain saw. It cuts square corners without over-cuts and the labor and expense of corner drilling and patching. That’s especially important in load-bearing walls where architects and engineers have specified no over-cut. Plunge Cut Capability of the Stanley DS11 allows quick cutting of window, door, conduit and duct openings in walls and notching and trimming of concrete pipe. Ergonomic Handles and Guards help to reduce operator fatigue and provide protection from contact with the chain or materials being cut.
| Item | U.S. | Metric |
| Cutting Depths | 12, 15, or 18" | 31, 38, or 45 cm |
| Bar Lengths | 12, 15, or 18" | 31, 38, or 45 cm |
| Input Flow Range | 12 gpm | 45 lpm |
| Input Pressure | 2000 psi | 140 bar |
| Maximum Feed Force | 45 lb. | 200 Nm |
| Chain Type | 3/8" Pitch | |
| Weight (18" bar & chain) | 26 lb. | 11.8 kg |
| Length (with bar & chain) | 32, 35, or 38" | 81, 89, or 97 cm |
| Width | 9" | 23 cm |
| Lubrication / Cooling | Internal Water Channels in Bar | |
| Porting | 8 SAE O-Ring | |
| Connector | 3/8" Male Pipe Hose End | |
| Item | US | Metric |
| Wheel Dia. | 14 in. | 35.6 cm |
| Weight | 21 lb. | 9.5 kg |
| Length | 20 in. | 51 cm |
| Width | 12 in. | 30.5 cm |
| Pressure | 1000 - 2000 psi | 70 - 140 bar |
| Flow Range | 7-9 gpm | 26-34 lpm |
Hydraulic Cutting Equipment Main Index | Hydraulics Main Index
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |