Scott Pressur Vak II - Chambers - Aqua Air Industries

Scott® Pressur Vak II

The Pressur Vak II is designed to administer oxygen or gas mixtures to a diver or patient in a hyperbaric chamber environment. The demand regulator assembly provides breathing gas on demand (inhalation). The regulator is designed to operate w/ a constant inlet pressure of 65 to 125 psi over chamber pressure. The vacuum regulator allows the exhaled gases to be carried to outside the chamber thereby eliminating oxygen buildup or contamination of the chamber environment.

The vacuum of the exhaled gas is a direct function of the differential pressure of the chamber and the ambient environment. For chamber depths over 60 FSW, a secondary vacuum regulator must be installed. A Hull-stop valve should be an integral part of the system as a safety device to shut down the vacuum should a pressure loss occur. The optional pressure reducing regulator is a small reliable regulator assembly w/ an oxygen coupling.

Warning

The Pressur Vak II is designed for surface decompression in a recompression chamber and is not intended for underwater use. It may also be used for other applications which require overboard discharge of exhaled gas.

Features

Face seal is available in FIVE sizes
Quick disconnect face seal allows easy cleaning
Optional full head harness for added comfort during long administration
Exhausts exhaled gases overboard, permitting minimum ventilation of the chamber
Demand regulator permits constant flow operation
Optional 300 to 2250 psi first stage regulator maintains constant inlet pressure to the demand regulator

How to Order

803139-	P-Vak Assembly w/ Demand and Exhaust Regulators, Manifold, Twin Hose Assembly & Quick Disconnects.
803140-	P-Vak Assembly w/ Demand and Exhaust Regulators, Manifold, Twin Hose Assembly w/ Quick Disconnects and Microphone Assembly

-00-	W/ First Stage Pressure Reducing Regulator (801804-00)
-01-	Without First Stage Pressure Reducing Regulator

-05	Extra Small
-01	Small
-02	Medium
-03	Large
-04	X-Large

Head Harness

Head Harness

Light weight polyester netting w/ Velcro straps, allows a snug fit around the upper portion of the head evenly distributing the weight. Can be used as a replacement of the 803115-01 elastic strap assembly.

Optional Items Not Shown

Harness Assembly	802005-02
Faceseal Assembly w/ 150 ohm Dynamic Microphone Assembly	803152 (size M)
Microphone Only	1408
Repair Kits
Demand Regulator	RK-800954-01
Exhaust Regulator	RK-801274-00
P-Vak II System	RD-803139 (XX)*
* (XX) Insert Face Seal Size

Scott® Pressur Vak II Parts Breakdown

Items not shown in the breakdown

n/s	802005-25	Head Cap / Harness Assembly
n/s	803152 (xx M) xx=size	Face Seal Assembly w/ 150 ohm Dynamic Microphone Assembly
n/s	1408	Microphone Only
n/s	RK-800954-01	Demand Regulator Repair Kit
n/s	RK-801274-00	Exhaust Regulator Repair Kit
n/s	RK-803139-XX (xx select face seal size)	Inhalator Repair Kit 01=Small, 02=Medium, 03=Med. Large, 04=Large, 05=Extra Small

Hyperbarics Main Index

Home | Product Index | Email

AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA

Phone	(504) 362-8124
Fax	(504) 362-3600
E-Mail	sales@aquaairind.com