Oil types (click on names for info)
Halocarbon 0.8 oil is a low molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 0.8 oil is the lowest viscosity oil that is manufactured by Halocarbon Products. Halocarbon 0.8 oil is used mostly as a low temperature bath fluid. This oil has a very low pour point and not miscible with water. Halocarbon 0.8 oil can be used as a process solvent in certain applications.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-200 deg F |
|
|
-129 deg C |
|
Viscosity Range |
0.72 to 1.00 cST |
|
Viscosity, centistoke |
|
|
@-65 deg F |
5.7 |
|
@100 deg F |
0.8 |
|
@160 deg F |
0.54 |
|
ISO Grade |
1 (approx.) |
|
Density, g/ml |
1.71 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 1.8 oil is a low molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 1.8 oil is one of the lower viscosity oils that is manufactured by Halocarbon Products. Some of the uses of Halocarbon 1.8 oil are as a metal working and wire drawing fluid.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-135 deg F |
|
|
-93 deg C |
|
Viscosity, centistoke |
|
|
@-65 deg F |
143 |
|
@100 deg F |
1.8 |
|
@160 deg F |
1.1 |
|
ISO Grade |
2 (approx.) |
|
Density, g/ml |
1.82 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 4.2 oil is a low molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 4.2 oil is one of the lower viscosity oils that is manufactured by Halocarbon Products. The major uses of Halocarbon 4.2 oil are as an inert instrument fill fluid and for the general lubrication for pumps.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-100 deg F |
|
|
-73 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
4.2 |
|
@160 deg F |
1.9 |
|
@210 deg F |
1.2 |
|
ISO Grade |
5 (approx.) |
|
Density, g/ml |
1.85 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 6.3 oil is a low molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 6.3 oil is one of the lower viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 6.3 oil is as an instrument fill fluid where chemical inertness is needed.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-95 deg F |
|
|
-71 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
6.3 |
|
@160 deg F |
2.6 |
|
@210 deg F |
1.6 |
|
ISO Grade |
10 (approx.) |
|
Density, g/ml |
1.87 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 27 oil is a medium molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 27 oil is one of the medium viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 27 oil is for general-purpose lubrication, such as bearings, compressors, gear-boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-40 deg F |
|
|
-40 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
27 |
|
@160 deg F |
6.8 |
|
@210 deg F |
3.1 |
|
ISO Grade |
22-32 (approx.) |
|
Density, g/ml |
1.90 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 56 oil is a medium molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 56 oil is one of the medium viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 56 oil is for general purpose lubrication, such as bearings, compressors, gear boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-30 deg F |
|
|
-34 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
56 |
|
@160 deg F |
11 |
|
@210 deg F |
4.9 |
|
ISO Grade |
46-68 (approx.) |
|
Density, g/ml |
1.92 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 95 oil is a high molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 95 oil is one of the higher viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 95 oil is for general purpose lubrication, such as bearings, compressors, gear boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
-15 deg F |
|
|
-26 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
95 |
|
@160 deg F |
16 |
|
@210 deg F |
6.3 |
|
ISO Grade |
68-100 (approx.) |
|
Density, g/ml |
1.92 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 200 oil is a high molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 200 oil is one of the higher viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 200 oil is for general purpose lubrication, such as bearings, compressors, gear boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
10 deg F |
|
|
-12 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
200 |
|
@160 deg F |
26 |
|
@210 deg F |
9 |
|
ISO Grade |
150-220 (approx.) |
|
Density, g/ml |
1.95 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 400 oil is a high molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 400 oil is one of the higher viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 400 oil is for general purpose lubrication, such as bearings, compressors, gear boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
15 deg F |
|
|
-9 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
400 |
|
@160 deg F |
40 |
|
@210 deg F |
12 |
|
ISO Grade |
320-460 (approx.) |
|
Density, g/ml |
1.95 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 700 oil is a high molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 700 oil is one of the higher viscosity oils that is manufactured by Halocarbon Products. The major application of Halocarbon 700 oil is for general purpose lubrication, such as bearings, compressors, gear boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart.
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
40 deg F |
|
|
5 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
700 |
|
@160 deg F |
62 |
|
@210 deg F |
17 |
|
ISO Grade |
680 (approx.) |
|
Density, g/ml |
1.95 |
|
Appearance |
Clear, Colorless Fluid |
Halocarbon 1000N oil is a high molecular weight polymer of chlorotrifluoroethylene (PCTFE). This oil is manufactured by a controlled polymerization process and then is stabilized to give it some very unique properties. This oil is safe, chemically inert and nonflammable and can be used with oxygen or chlorine. It has good lubricity, high thermal stability and low compressibility.
Halocarbon 1000N oil is the highest viscosity oil that is manufactured by Halocarbon Products. The major application of Halocarbon 1000N oil is for general purpose lubrication, such as bearings, compressors, gear boxes and pumps. This Halocarbon oil can be interchanged with hydrocarbon oils with some slight modification. Please see the oil selection chart
Specifications
|
Flash and Fire Point |
NONE |
|
Pour Point |
50 deg F |
|
|
10 deg C |
|
Viscosity, centistoke |
|
|
@100 deg F |
1000 |
|
@160 deg F |
83 |
|
@210 deg F |
22 |
|
ISO Grade |
1000 (approx.) |
|
Density, g/ml |
1.95 |
|
Appearance |
Clear, Colorless Fluid |
Home | Product Index | Email
© 2003 Aqua Air Industries, Inc. - All Rights Reserved
AQUA AIR INDUSTRIES, INC.
639 Manhattan Blvd.
Harvey, Louisiana 70058 USA
| Phone | (504) 362-8124 |
| Fax | (504) 362-3600 |
| sales@aquaairind.com |